Mount NAS Storage in Linux Overview 转载

</td>
<td valign="top" width="613">

Then…

</td>

</tr>
<tr>
<td valign="top" width="399">

RedHat Enterprise Linux,CentOS or CloudLinux

</td>
<td valign="top" width="613">

Determine if the cifs-utils utility is installed by running the following command:

root@slnastest [~]# rpm -q cifs-utilsNote: If cifs-utils is not installed,the following message will appear:

package cifs-utils is ?not installed

• If cifs-utils is installed,proceed to the next step.

• If cifs-utils is not installed,install the utility using the following command:

root@slnastest [~]# yum
install cifs-utils

</td>

</tr>
<tr>
<td valign="top" width="399">

Debian or Ubuntu

</td>
<td valign="top" width="613">

Determine if the cifs-utils utility is installed by running the following command:

root@slnastest:~# dpkg-query -S cifs-utils

Note: If cifs-utils is not installed,the following message will appear:

dpkg-query: no path found matching ??pattern *cifs-utils*.

• If cifs-utils is installed,proceed to the next step.

• If cifs-utils is not installed,install the utility using the following command:

root@slnastest [~]# apt-get install
cifs-utils
root@slnastest:~# dpkg-query -S cifs-utils
cifs-utils: /usr/share/doc/cifs-utils
cifs-utils: /usr/share/doc/cifs-utils/changelog.gz
cifs-utils: /usr/share/doc/cifs-utils/NEWS.Debian.gz
cifs-utils: /usr/share/doc/cifs-utils/changelog.Debian.gz
cifs-utils: /usr/share/doc/cifs-utils/copyright

</td>

</tr>

1. Create the directory and mount the device using the following commands:

   mkdir /local/mountpointmount -t cifs //Hostname/Username -o username=username,password=password,rw,nounix,iocharset=utf8,file_mode=0644,dir_mode=0755 /mnt Example:??? root@slnastest [~]# mkdir /mnt/nas??? root@slnastest [~]# mount -t cifs //nas05.service.softlayer.com/SL12345-1 -o username=SL12345-1,password=NASPASSWORD rw,dir_mode=0755 /mnt/nas??? root@slnastest [~]# df -Th /mnt/nas/Filesystem??? Type??? Size? Used Avail Use% Mounted on??? //nas05.service.softlayer.com/SL12345-1????????????? cifs???? 54T?? 49T? 5.3T? 91% /mnt/nas

2. Determine if the NAS should mount on reboot.

</td>
<td valign="top" width="613">

Then…

</td>

</tr>
<tr>
<td valign="top" width="399">

Mount on reboot

</td>
<td valign="top" width="613">

Add the following command to the /etc/fstab file:

??? //nas05.service.softlayer.com/SL12345-1??????? /mnt/nas ??? ??? cifs defaults,username=SL12345-1,password=NASPASSWORD 0 0

</td>

</tr>
<tr>
<td valign="top" width="399">

Not mount on reboot

</td>
<td valign="top" width="613">

Proceed to the next step.

</td>

</tr>

1. Unmount and mount the NAS to verify that the fstab was edited correctly.? Refer to the table below for the unmount and mount commands.

</td>
<td valign="top" width="613">
<p align="center">Command

</td>

</tr>
<tr>
<td valign="top" width="399">

Unmount the NAS

</td>
<td valign="top" width="613">

root@slnastest [~]# umount /mnt/nas/

root@slnastest [~]# df -Th /mnt/nas

Filesystem??? Type??? Size? Used Avail Use% Mounted on

/dev/xvda2??? ext3???? 25G? 4.6G?? 19G? 20% /

</td>

</tr>
<tr>
<td valign="top" width="399">

Mount the NAS

</td>
<td valign="top" width="613">

root@slnastest [~]# mount /mnt/nas/

root@slnastest [~]# df -Th /mnt/nas/

Filesystem??? Type??? Size? Used Avail Use% Mounted on

//nas05.service.softlayer.com/SL12345-1

????????????? cifs???? 54T?? 49T? 5.3T? 91% /mnt/nas

</td>

</tr>

（编辑：辽源站长网）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!